Set ‘ip authentication key-chain eigrp’ Details Specify the type of authentication used in Enhanced Interior Gateway Routing Protocol (EIGRP) packets per interface. Rationale: Configuring EIGRP...
Set ‘ip authentication mode eigrp’ Details Configure authentication to prevent unapproved sources from introducing unauthorized or false routing messages. Rationale: This is part of the...
Set ‘ip access-list extended’ to Forbid Private Source Addresses from External Networks – ‘Deny 192.168.0.0’ Details This command places the router in access-list configuration mode, where you must define the denied or permitted access conditions...
Set ‘ip access-list extended’ to Forbid Private Source Addresses from External Networks – ‘Deny 224.0.0.0’ Details This command places the router in access-list configuration mode, where you must define the denied or permitted access conditions...
Set ‘ip access-list extended’ to Forbid Private Source Addresses from External Networks – ‘Deny host 255.255.255.255’ Details This command places the router in access-list configuration mode, where you must define the denied or permitted access conditions...
Set ‘ip ospf message-digest-key md5’ Details Enable Open Shortest Path First (OSPF) Message Digest 5 (MD5) authentication. Rationale: This is part of the OSPF authentication...
Set ‘ip tftp source-interface’ to the Loopback Interface Details Specify the IP address of an interface as the source address for TFTP connections. Rationale: This is required so...
Set ‘key’ Details Configure an authentication key on a key chain. Rationale: This is part of the routing authentication setup Impact: Organizations...
Set ‘key chain’ Details Define an authentication key chain to enable authentication for routing protocols. A key chain must have at least one...
Set ‘key’ for each ‘ntp server’ Details Specifies the authentication key for NTP. Rationale: This authentication feature provides protection against accidentally synchronizing the ntp system to...