Set ‘ip tftp source-interface’ to the Loopback Interface
Details Specify the IP address of an interface as the source address for TFTP connections. Rationale: This is required so...
- Home
- Security Hardening
- CIS Cisco IOS 15 L2 V4.1.0
CIS Cisco IOS 15 L2 V4.1.0
Set ‘ip verify unicast source reachable-via’
Details Examines incoming packets to determine whether the source address is in the Forwarding Information Base (FIB) and permits the...Set ‘key’
Details Configure an authentication key on a key chain. Rationale: This is part of the routing authentication setup Impact: Organizations...Set ‘key’
Details Configure an authentication key on a key chain. Rationale: This is part of the routing authentication setup Impact: Organizations...Set ‘ip ospf message-digest-key md5’
Details Enable Open Shortest Path First (OSPF) Message Digest 5 (MD5) authentication. Rationale: This is part of the OSPF authentication...Set ‘ip rip authentication key-chain’
Details Enable authentication for Routing Information Protocol (RIP) Version 2 packets and to specify the set of keys that can...Set ‘key chain’
Details Define an authentication key chain to enable authentication for routing protocols. A key chain must have at least one...Set ‘key chain’
Details Define an authentication key chain to enable authentication for RIPv2 routing protocols. Rationale: This is part of the routing...Set ‘key’ for each ‘ntp server’
Details Specifies the authentication key for NTP. Rationale: This authentication feature provides protection against accidentally synchronizing the ntp system to...Set ‘key-string’
Details Configure the authentication string for a key. Rationale: This is part of the routing authentication setup Impact: Organizations should...