Create a single ‘interface loopback’ – ‘Only one loopback interface IP Address is defined’ Details Configure a single loopback interface. Rationale: Software-only loopback interface that emulates an interface that is always up. It is...
Create a single ‘interface loopback’ – ‘Only one loopback interface is defined’ Details Configure a single loopback interface. Rationale: Software-only loopback interface that emulates an interface that is always up. It is...
Require ‘aes 128’ as minimum for ‘snmp-server user’ when using SNMPv3 Details Specify the use of a minimum of 128-bit AES algorithm for encryption when using SNMPv3. Rationale: SNMPv3 provides much...
Set ‘aaa accounting connection’ Details Provides information about all outbound connections made from the network access server. Rationale: Authentication, authorization and accounting (AAA) systems...
Set ‘aaa accounting exec’ Details Runs accounting for the EXEC shell session. Rationale: Authentication, authorization and accounting (AAA) systems provide an authoritative source for...
Set ‘aaa accounting network’ Details Runs accounting for all network-related service requests. Rationale: Authentication, authorization and accounting (AAA) systems provide an authoritative source for...
Set ‘aaa accounting system’ Details Performs accounting for all system-level events not associated with users, such as reloads. Rationale: Authentication, authorization and accounting (AAA)...
Set ‘aaa accounting’ to log all privileged use commands using ‘commands 15’ Details Runs accounting for all commands at the specified privilege level. Rationale: Authentication, authorization and accounting (AAA) systems provide an...
Set AAA ‘source-interface’ Details Force AAA to use the IP address of a specified interface for all outgoing AAA packets Rationale: This is...
Set ‘address-family ipv4 autonomous-system’ Details Configure the EIGRP address family. Rationale: Rationale: EIGRP is a true multi-protocol routing protocol and the ‘address-family’ feature enables...