Set ‘buffer size’ for ‘logging buffered’
Details Enable system message logging to a local buffer. Solution Configure buffered logging (with minimum size). Recommended size is 64000....
- Home
- Security Hardening
- CIS Cisco IOS 12 L1 V4.0.0
CIS Cisco IOS 12 L1 V4.0.0
Set ‘exec-timeout’ less than or equal to 10 minutes ‘line tty’
Details If no input is detected during the interval, the EXEC facility resumes the current connection. If no connections exist,...Set ‘exec-timeout’ to less than or equal to 10 minutes for ‘line aux 0’
Details If no input is detected during the interval, the EXEC facility resumes the current connection. If no connections exist,...Set ‘exec-timeout’ to less than or equal to 10 minutes ‘line console 0’
Details If no input is detected during the interval, the EXEC facility resumes the current connection. If no connections exist,...Set ‘exec-timeout’ to less than or equal to 10 minutes ‘line vty’
Details If no input is detected during the interval, the EXEC facility resumes the current connection. If no connections exist,...Set IP address for ‘logging host’
Details Log system messages and debug output to a remote host. Solution Designate one or more syslog servers by IP...Set ‘logging console critical’
Details Verify logging to device console is enabled and limited to a rational severity level to avoid impacting system performance...Set ‘logging on’
Details Enable logging of system messages. Solution Enable system logging. hostname(config)#logging on Supportive Information The following resource is also helpful....Set ‘logging trap informational’
Details Limit messages logged to the syslog servers based on severity level informational. Solution Configure SNMP trap and syslog logging...Set ‘login authentication for ‘line con 0’
Details Authenticates users who access the router or switch using the serial console port. Solution Configure management lines to require...