Details
Display of the DoD-approved use notification before granting access to the network device ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
System use notifications are required only for access via logon interfaces with human users.
Solution
Configure the router to display the Standard Mandatory DoD Notice and Consent Banner before granting access as shown in the following example:
[edit system login]
set message ‘You are accessing a U.S. Government (USG) Information System (IS) that is providednfor USG-authorized use only.nnBy using this IS (which includes any device attached to this IS), you consent to thenfollowing conditions:nn-The USG routinely intercepts and monitors communications on this IS for purposesnincluding, but not limited to, penetration testing, COMSEC monitoring, networknoperations and defense, personnel misconduct (PM), law enforcement (LE), andncounterintelligence (CI) investigations.nn-At any time, the USG may inspect and seize data stored on this IS.nn-Communications using, or data stored on, this IS are not private, are subject to routinenmonitoring, interception, and search, and may be disclosed or used for any USG-nauthorized purpose.nn-This IS includes security measures (e.g., authentication and access controls) to protectnUSG interests–not for your personal benefit or privacy.nn-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CIninvestigative searching or monitoring of the content of privileged communications, ornwork product, related to personal representation or services by attorneys,npsychotherapists, or clergy, and their assistants. Such communications and work productnare private and confidential. See User Agreement for details.’
Supportive Information
The following resource is also helpful.
This security hardening control applies to the following category of controls within NIST 800-53: Access Control.This control applies to the following type of system Juniper.
References
- 800-53|AC-8a.
- CAT|II
- CCI|CCI-000048
- Rule-ID|SV-101207r2_rule
- STIG-ID|JUNI-ND-000160
- Vuln-ID|V-91107