Details

Display of the DoD-approved use notification before granting access to the network device ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via logon interfaces with human users.

Solution

Configure the switch to display the Standard DoD Notice and Consent banner.

To configure the banner, enter the following commands from the configuration mode interface. Replace the bracketed data with the DoD Banner.

switch(config)#banner login
[DoD Banner]
EOF

Supportive Information

The following resource is also helpful.

• https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Arista_MLS_DCS-7000_Series_Y20M07_STIG.zip

This security hardening control applies to the following category of controls within NIST 800-53: Access Control.This control applies to the following type of system Arista.

References

• 800-53|AC-8a.
• CAT|II
• CCI|CCI-000048
• Group-ID|V-60843
• Rule-ID|SV-75299r1_rule
• STIG-ID|AMLS-NM-000160
• Vuln-ID|V-60843

Source

• Tenable.com/audits