1. Home
  2. Security Hardening
  3. DISA STIG Juniper Router RTR V2R2
  4. JUNI-RT-000235 – The Juniper router must not be configured to use IPv6 Site Local Unicast addresses.

JUNI-RT-000235 – The Juniper router must not be configured to use IPv6 Site Local Unicast addresses.

Details

As currently defined, site local addresses are ambiguous and can be present in multiple sites. The address itself does not contain any indication of the site to which it belongs. The use of site-local addresses has the potential to adversely affect network security through leaks, ambiguity, and potential misrouting as documented in section 2 of RFC3879. RFC3879 formally deprecates the IPv6 site-local unicast prefix FEC0::/10 as defined in RFC3513.

Solution

Configure the device using authorized IPv6 addresses.

Supportive Information

The following resource is also helpful.

This security hardening control applies to the following category of controls within NIST 800-53: Configuration Management.This control applies to the following type of system Juniper.

References

Source

Updated on July 16, 2022
Was this article helpful?

Related Articles